A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Best Aftermarket Radius arms
- supergaz
- New Member
-
Public
Less
More
- Thank you received: 0
01 Dec 2013 21:33 #94219
by supergaz
Replied by supergaz on topic Best Aftermarket Radius arms
The RR twister arms do not work, the axle end bushes will always bind first. KAP tried this years ago and went back to fixed arms.
Please Log in or Create an account to join the conversation.
- idiotmobil
- New Member
-
Public
Less
More
- Thank you received: 0
01 Dec 2013 23:05 #94233
by idiotmobil
Replied by idiotmobil on topic Best Aftermarket Radius arms
what left were you on and do you know if he still has it
Please Log in or Create an account to join the conversation.
02 Dec 2013 10:17 #94268
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Best Aftermarket Radius arms
Obviously I have a vested interest in this as I have ORA arms in the BigJimny store - however as a general opinion.....look very carefully at the quality of the engineering and construction of any part like arms, particularly if you are considering using them on an on-road vehicle.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- macguyverjimny
- New Member
-
Public
Less
More
- Thank you received: 0
02 Dec 2013 15:36 #94288
by macguyverjimny
Please
Replied by macguyverjimny on topic Best Aftermarket Radius arms
idiotmobil wrote: mystic rich you got any drawins for the arms you made I going to make some soon and so tempates or drawings would make life alot easyer
Please

Please Log in or Create an account to join the conversation.
- darthloachie
- New Member
-
Public
Less
More
- Thank you received: 0
02 Dec 2013 20:57 #94336
by darthloachie
Replied by darthloachie on topic Best Aftermarket Radius arms
theres only one maker of caster corrected radius arms for a 4" lift and that is ORA
Rhinorays are great and tough due to their I beam profile but are only for 2.5" lift
we have them on a 4" lift and the are OK
jimny bits and kap are for 3"
Rhinorays are great and tough due to their I beam profile but are only for 2.5" lift
we have them on a 4" lift and the are OK
jimny bits and kap are for 3"
Please Log in or Create an account to join the conversation.
- ME13OSE
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
02 Dec 2013 23:26 #94368
by ME13OSE
Replied by ME13OSE on topic Best Aftermarket Radius arms
What size of tyres you running on your lift Darthloachie, and what offset of wheels?
Please Log in or Create an account to join the conversation.
Time to create page: 0.133 seconds