A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Pitch and Roll Meters
- lukeyblunt
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
29 Aug 2013 11:01 #81425
by lukeyblunt
Pitch and Roll Meters was created by lukeyblunt
Is there such a thing as a good looking pitch / roll meter..??
They all look so .. analog ! Red and yellow lines etc. :dry:
Has anyone found a nice looking, less 'grandfather clock' style roll meter?
Gunna have some birthday money needing to be spent!!
So any other suggestions..?
Cheers,
LB
They all look so .. analog ! Red and yellow lines etc. :dry:
Has anyone found a nice looking, less 'grandfather clock' style roll meter?
Gunna have some birthday money needing to be spent!!
So any other suggestions..?

Cheers,
LB
Please Log in or Create an account to join the conversation.
29 Aug 2013 11:54 #81430
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Pitch and Roll Meters
I have not seen an aftermarket one.
A few Landcruisers and Mitsibushi have original pods on top of the dashboard with a sexy aircraft style artificial horizon in it which looks good.
A few Landcruisers and Mitsibushi have original pods on top of the dashboard with a sexy aircraft style artificial horizon in it which looks good.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- JerseyJimny
- New Member
-
Public
Less
More
- Thank you received: 0
29 Aug 2013 12:09 #81432
by JerseyJimny
Replied by JerseyJimny on topic Pitch and Roll Meters
There is aftermarket ones on amazon but they are sh*t...
They have been designed with a tiltable base which means if you do get it set up it moves and ends up showing some weird readings...
If your going for the look and nothing else go for it but actually Being of some use? I wouldn't recommend it
Your arse will tell you if your close to going over way before you actually do
They have been designed with a tiltable base which means if you do get it set up it moves and ends up showing some weird readings...
If your going for the look and nothing else go for it but actually Being of some use? I wouldn't recommend it
Your arse will tell you if your close to going over way before you actually do
Please Log in or Create an account to join the conversation.
- Poyner111
- New Member
-
Public
Less
More
- Thank you received: 0
29 Aug 2013 12:10 #81433
by Poyner111
Replied by Poyner111 on topic Pitch and Roll Meters
I have this one from Amazon.....sexy hmmm no but does the job, although they bounce around a lot and generally just scares me that im at the angle it says !!! :woohoo:
Please Log in or Create an account to join the conversation.
- Poyner111
- New Member
-
Public
Less
More
- Thank you received: 0
29 Aug 2013 12:12 #81434
by Poyner111
Replied by Poyner111 on topic Pitch and Roll Meters
Please Log in or Create an account to join the conversation.
- Poyner111
- New Member
-
Public
Less
More
- Thank you received: 0
29 Aug 2013 12:13 #81435
by Poyner111
Replied by Poyner111 on topic Pitch and Roll Meters
Please Log in or Create an account to join the conversation.
Time to create page: 0.227 seconds