A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

kam diff lockers

  • Cider
  • Topic Author
  • New Member
  • New Member
    Public
More
15 Aug 2012 20:59 #46240 by Cider
Replied by Cider on topic Re: kam diff lockers
Well Bit of an up date :) As rob still has faith in them I rang Kam on 01483 419779 and got through
to David.At the moment as what rob said they do not have all the bits to make a kit to sale,As theres been little interest in the market place. :huh: Seem when you try to contact them through their
webb site they can`t access their emails "strange" so I was told to send any enquiries to
sales@kamdiffs.com and address them to Daivd or ring the number above
So when theres enough enquiries he`ll present it to the allmakes board "paymasters" and the difflockers will be back on the market again hopefully :cheer:
So I`ll give them a little longer before sending my order to china
Cheers
Pete

Please Log in or Create an account to join the conversation.

  • oxford_bloke
  • New Member
  • New Member
    Public
More
15 Aug 2012 21:11 #46242 by oxford_bloke
Replied by oxford_bloke on topic Re: kam diff lockers
is there any news on front lockers? as for 550 for HD shafts and a locker is very good i would be very interested in a front set and locker too

Please Log in or Create an account to join the conversation.

  • Sponnie
  • New Member
  • New Member
    Public
More
16 Aug 2012 09:12 #46251 by Sponnie
Replied by Sponnie on topic kam diff lockers
So if I understand this correctly. There has been little interest in their rear lockers from us tight Suzuki lot ;) So fair enough it makes sense not to have anything in stock.

BUT... They are supposedly investing many 1,000s into a front kit??

Yes its about time we had the ultimate set up for the flimsy front shafts etc so good on them for taking the plunge. But if we are not buying the rears, who's going to buy the fronts??

I know it's probably not that simple but it's a bit worrying for KAM.

Me personally will defiantly be up for a full set. But still, is the market going to be there for them?

Please Log in or Create an account to join the conversation.

  • Cider
  • Topic Author
  • New Member
  • New Member
    Public
More
16 Aug 2012 10:54 #46254 by Cider
Replied by Cider on topic Re: kam diff lockers
From what I understand the more we contact David at kam with enquiries,he can present it to the board
to ok the investment,so they can produce the jimny rear lockers again.Not sure on the fronts
didn`t ask
To me it seems allmakes hold the purse strings,so all we can hope for is that both Kam/Allmakes
are still committed in suzuki,surpose only time will tell
If all goes well And they get the ok the rear lockers should be available in three months.

Please Log in or Create an account to join the conversation.

  • TomDK
  • New Member
  • New Member
    Public
More
16 Aug 2012 14:16 - 04 Jun 2013 13:07 #46259 by TomDK
Replied by TomDK on topic Re: kam diff lockers
Well, luckily KAM are not the only ones "doing" HD shafts.


Have a look here :-)

IIRC fronts HD shafts are around 1000 euro incl shipping. but that's without a locker. Don't know if the do any of that.
Last edit: 04 Jun 2013 13:07 by mlines.

Please Log in or Create an account to join the conversation.

  • oxford_bloke
  • New Member
  • New Member
    Public
More
16 Aug 2012 15:21 #46260 by oxford_bloke
Replied by oxford_bloke on topic Re: kam diff lockers
thats silly money there are alot of companies developing/testing some at the moment hopefully to be on sale by the end of the year. so its worth hanging on at the moment but if KAM come up with both front and rear lockers i know where im going

Please Log in or Create an account to join the conversation.

Time to create page: 5.043 seconds
Joomla template by a4joomla
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.