An area for non Suzuki Jimny related chat. Keep it clean etc. as this is a public forum with young readers.
Gas canister
- Grego
- New Member
-
Public
- helijohn
- Topic Author
- New Member
-
Public
07 Sep 2015 18:02 #151501
by helijohn
You have me thinking. :blink:
And leave the nozzle on????
I could use ATF for rubber seals.
Replied by helijohn on topic Gas canister
Grego wrote: You could try a drop of silicone oil on the seals
You have me thinking. :blink:
And leave the nozzle on????
I could use ATF for rubber seals.
Please Log in or Create an account to join the conversation.
- helijohn
- Topic Author
- New Member
-
Public
07 Sep 2015 18:15 #151502
by helijohn
You beat me to the posting.
You are referring to Pellgunoil which is dead costly. 
ATF is exactly what I use on my airgun seals. I put a drop (ATF) on the CO2 caplet when installing it too. CO2 dries out and rots the (nitrile) rubber.
Also silicone is a no no where there is metal to metal as it locks up.
Replied by helijohn on topic Gas canister
Grego wrote: Crosman, an american air pistol/rifle manufacturer sell little tubes of red oil for £4ish that is apparently designed to seal air and co2 in excess of 3000psi, what they dont tell you is that it is standard ATF oil .
Use a drop of clean atf oil on the seals...the advantage of driving an auto :laugh:
You beat me to the posting.
You are referring to Pellgunoil which is dead costly. ATF is exactly what I use on my airgun seals. I put a drop (ATF) on the CO2 caplet when installing it too. CO2 dries out and rots the (nitrile) rubber.Also silicone is a no no where there is metal to metal as it locks up.
Please Log in or Create an account to join the conversation.
- Grego
- New Member
-
Public
- helijohn
- Topic Author
- New Member
-
Public
Time to create page: 0.659 seconds