× A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Really need help now...

More
03 Jan 2020 11:23 #216953 by Basketcase
Right I posted a while ago about my jimny being poorly...aka f****d... the timing belt was pretty slack so I swapped that..I thought the timing was out but I don’t really know..watched 3 videos on YouTube and they’re all different..time with cyl 1, cyl 4 blah blah I assume it’s timed up ok but have no idea how to check the bottom crank lines up with the mark on the case, the cam pulley lines up the I&E mark on the pulley but there’s a single I and a single E mark also..should it line up with one of those instead? I’ve had the exhaust off to check that’s not blocked(just took it off at the manifold as it was easier) starts but still won’t rev...all the intake sensors have been changed and makes no difference...any ideas further?

Cheers guys

Please Log in or Create an account to join the conversation.

More
03 Jan 2020 12:15 #216955 by Basketcase
Replied by Basketcase on topic Really need help now...
I will sell it if anyone wants it for something? It’s got 235/75 15 mud tyres on it, 2-3” suspension lift and a 2” body lift.mot till next year...or if anyone needs parts.

Please Log in or Create an account to join the conversation.

  • Lambert
  • Lambert's Avatar
  • Offline
  • Moderator
  • Moderator
    Registered
  • The quickest Jimny in Harrogate...(that I own)
More
03 Jan 2020 14:07 #216957 by Lambert
Replied by Lambert on topic Really need help now...
If it won't rev with the manifold off I would suggest it is not quite timed perfectly. Unfortunately I don't know what the actual correct procedure is to time a g series but I am certain someone will on here, guys?

Dreadnaught (black 2011)
The following user(s) said Thank You: Basketcase

Please Log in or Create an account to join the conversation.

More
03 Jan 2020 16:11 #216960 by maverick
Replied by maverick on topic Really need help now...
Time to take it to your friendly garage

Jalapeño, IISY?

Please Log in or Create an account to join the conversation.

More
03 Jan 2020 22:15 #216975 by kirkynut
Replied by kirkynut on topic Really need help now...
Does it pop and bang with misfires as that is usual when the timing is more than a little out.

If the cam and crank markings are in line on the right stroke then I'm at a loss too.

Does it idle fine?

Kirkynut

The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.

My Jimny Thread Here: www.bigjimny.com/index.php/forum/8-my-ji...on-continues?start=0

Please Log in or Create an account to join the conversation.

More
04 Jan 2020 11:10 #216981 by Basketcase
Replied by Basketcase on topic Really need help now...
I’m not sure if the crank and cams are in the right time or anything. It isles fine just as soon as you press accelerator it bogs right down and cuts out..you can get it to rev if you let off and quickly press and let off the pedal repeatedly

Please Log in or Create an account to join the conversation.

More
04 Jan 2020 11:47 #216983 by Keithy
Replied by Keithy on topic Really need help now...
If there was a laughing smiley I'd have left it and moved along.

I just googled the timing marks for that engine.....I'm not into retro engines.

Looks to be an easy job.......crank on tdc and cam pulley mark to top of casing mark.

Do you know a mechanic who could help?

Please Log in or Create an account to join the conversation.

More
04 Jan 2020 12:22 #216985 by Basketcase
Replied by Basketcase on topic Really need help now...
I got the idea of the pulley mark but On the cam pulley there’s 3 marks I,E and I+E which one is supposed to line up I dunno....I’m a fast fit guy myself I’ve asked a guy at work to help but he’s too busy fixing stuff and rebuilding engines to help. He doesn’t know Suzuki engines so would he not be just guessing anyway? The local Suzuki dealer doesn’t have a Suzuki master tech either! So can’t just go and mither then for help!

Please Log in or Create an account to join the conversation.

More
04 Jan 2020 13:35 #216989 by Keithy

Please Log in or Create an account to join the conversation.

More
05 Jan 2020 15:45 #217025 by Basketcase
Replied by Basketcase on topic Really need help now...
Yea that’s the everything same on mine. Is that the single letter E should be lined up on the cam? Cheers

Please Log in or Create an account to join the conversation.

Time to create page: 0.098 seconds
Powered by Kunena Forum

I hope you enjoy using this forum. Please consider making a donation towards the upkeep of this forum website.

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.