A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
how many variations of front wheel bearing
- ozzyboy
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
12 Nov 2019 10:31 #215571
by ozzyboy
how many variations of front wheel bearing was created by ozzyboy
hi
im under the impression that there is only one standard front wheel bearing
im having them done as I write this but the garage says its a tapered bearing and I have supplied the wrong ones
im under the impression that there is only one standard front wheel bearing
im having them done as I write this but the garage says its a tapered bearing and I have supplied the wrong ones
Please Log in or Create an account to join the conversation.
12 Nov 2019 10:35 #215572
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:how many variations of front wheel bearing
Only one type, not tapered. 1998 onwards
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: ozzyboy
Please Log in or Create an account to join the conversation.
12 Nov 2019 10:37 #215573
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:how many variations of front wheel bearing
Fyi, the tapered ones can be fitted, they are from the coil spring SJ we never had.
Sent from my Pixel 2 XL using Tapatalk
Sent from my Pixel 2 XL using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: ozzyboy
Please Log in or Create an account to join the conversation.
Time to create page: 1.239 seconds