A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
GEN 4 - Rear door wind noise
- 888nmc
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
13 Oct 2019 17:51 #214706
by 888nmc
GEN 4 - Rear door wind noise was created by 888nmc
Does anybody think it's a bit excessive? I'm finding myself checking over my shoulder to make sure the door's closed properly.
Maybe i'm noticing it more now the roads are wet. Having the rear seats up muffles it, but I usually drive with mine flat.
I've checked my door rubbers and it seems to have a good seal. Can anything be done to reduce the noise?
Maybe i'm noticing it more now the roads are wet. Having the rear seats up muffles it, but I usually drive with mine flat.
I've checked my door rubbers and it seems to have a good seal. Can anything be done to reduce the noise?
Please Log in or Create an account to join the conversation.
- Daniel30
- New Member
-
Public
Less
More
- Thank you received: 0
13 Oct 2019 17:57 #214707
by Daniel30
Replied by Daniel30 on topic GEN 4 - Rear door wind noise
Can't help I'm afraid gen 3 owner
But a subwoofer would..... :whistle: :whistle:
But a subwoofer would..... :whistle: :whistle:

Please Log in or Create an account to join the conversation.
13 Oct 2019 18:40 #214708
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic GEN 4 - Rear door wind noise
I haven't noticed anything, but I don't drive it in the wet.
It cost £20,000. I am NOT getting it wet, that is what the [strike]Renault[/strike] Nissan is for
It cost £20,000. I am NOT getting it wet, that is what the [strike]Renault[/strike] Nissan is for

If it suddenly breaks, go back to the last thing that you did before it broke and start looking there

Please Log in or Create an account to join the conversation.
13 Oct 2019 18:43 - 13 Oct 2019 18:46 #214709
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:GEN 4 - Rear door wind noise
I have not noticed it as excessive for a vehicle with a lot of bare metal inside. I can hear it in both the Gen3 and Gen4 but not so it's annoying.
We have a vibration buzz from the dashboard that goes when something warms up. Something like part of the heater vents or something with a warm bulb in it. Has anyone had this? Also, when solo driving I get a rattle from the metal end of the unused seat belt on the passenger side against the plastic cover on the B pillar?
Sent from my Pixel 2 XL using Tapatalk
We have a vibration buzz from the dashboard that goes when something warms up. Something like part of the heater vents or something with a warm bulb in it. Has anyone had this? Also, when solo driving I get a rattle from the metal end of the unused seat belt on the passenger side against the plastic cover on the B pillar?
Sent from my Pixel 2 XL using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Last edit: 13 Oct 2019 18:46 by mlines.
Please Log in or Create an account to join the conversation.
13 Oct 2019 18:46 #214711
by mlines
That's exactly James' policy, he was tramatised today as we felt we had to take it out as the rain had kept it in the garage all week
Sent from my Pixel 2 XL using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:GEN 4 - Rear door wind noise
facade wrote: I haven't noticed anything, but I don't drive it in the wet.
It cost £20,000. I am NOT getting it wet, that is what the [strike]Renault[/strike] Nissan is for
That's exactly James' policy, he was tramatised today as we felt we had to take it out as the rain had kept it in the garage all week
Sent from my Pixel 2 XL using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
13 Oct 2019 19:11 - 13 Oct 2019 19:15 #214712
by Gadget
Replied by Gadget on topic Re:GEN 4 - Rear door wind noise
Not noticed any noise from the rear in mine, but I've soundproofed the rear panels and floor with Dynamat which might have killed any noise. Details on the soundproofing here:
www.bigjimny.com/index.php/forum/8-my-ji...sz5?start=132#209035
www.bigjimny.com/index.php/forum/8-my-ji...sz5?start=132#209035
Last edit: 13 Oct 2019 19:15 by Gadget.
Please Log in or Create an account to join the conversation.
Time to create page: 2.005 seconds