Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
mudman's jimny
- JivingDaddy
- New Member
-
Public
Less
More
- Thank you received: 0
19 Feb 2013 18:54 #63204
by JivingDaddy
Replied by JivingDaddy on topic mudman's jimny
I couldn't go for them. The CO would be hanging the **** washing on them! :huh:
Please Log in or Create an account to join the conversation.
- mudman
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
19 Feb 2013 22:14 #63279
by mudman
Replied by mudman on topic mudman's jimny
i for got to say mainly as i was in a rush the bar that holds the mini shackel is a drilled bit of flat bar bent in half the shackles, adjusters, wire, hoops and clamps are all next to the rope in B&Q
Please Log in or Create an account to join the conversation.
- mudman
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
17 Jun 2013 16:48 #74139
by mudman
Replied by mudman on topic mudman's jimny
not had a update for a while so hears where we are at.................. shes broken
right so some where after this.............
im thinking about hear........
this happened
better pics hear now the axle is off the car
and the other side was about to snap
my jimny as it stands now with the axle on the floor
right so some where after this.............
im thinking about hear........
this happened
better pics hear now the axle is off the car
and the other side was about to snap
my jimny as it stands now with the axle on the floor
Please Log in or Create an account to join the conversation.
- mudman
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
17 Jun 2013 16:53 #74141
by mudman
Replied by mudman on topic mudman's jimny
ok so for some reason the pics didn't work and I don't them in the same way I all ways do any ideas???
Please Log in or Create an account to join the conversation.
- mudman
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
07 Jul 2013 21:31 #76378
by mudman
Replied by mudman on topic mudman's jimny
Please Log in or Create an account to join the conversation.
- mudman
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
07 Jul 2013 21:39 #76379
by mudman
Replied by mudman on topic mudman's jimny
rear light up grade i know some of you have been looking into something to do with the rear lights for a little while now so hear we go............
for this project you will need 40x 10mm red LEDs, 16x 10mm orange LEDs, 2x 50w load resistors (for the indicators) a NAS sepc defender fog light, a spear set of rear lights, some imagination and a shed load of time (the lights took about 6-7hrs to build took lots of working out and about 3-4hrs to fit what with wiring and stuff) :lol:
how the jimny looked before i started
and how it looks now
what the lights look like on (all on)
fog light in middle of the of the spear wheel
tail light
close up the camera flash has dulled the light slightly
how it looks with out flash
indicator LEDs form a ring around the reverse bulb to give the illusion of a orange bulb but you cant see that in this pic
stop and tail lights
tail at the top and stop light at the bottom
for this project you will need 40x 10mm red LEDs, 16x 10mm orange LEDs, 2x 50w load resistors (for the indicators) a NAS sepc defender fog light, a spear set of rear lights, some imagination and a shed load of time (the lights took about 6-7hrs to build took lots of working out and about 3-4hrs to fit what with wiring and stuff) :lol:
how the jimny looked before i started
and how it looks now
what the lights look like on (all on)
fog light in middle of the of the spear wheel
tail light
close up the camera flash has dulled the light slightly
how it looks with out flash
indicator LEDs form a ring around the reverse bulb to give the illusion of a orange bulb but you cant see that in this pic
stop and tail lights
tail at the top and stop light at the bottom
Please Log in or Create an account to join the conversation.
Time to create page: 0.530 seconds