Tell us about your Jimny and post some pictures! Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Darth's Jimny
- renard38
- New Member
-
Public
20 Dec 2011 18:57 #28729
by renard38
Replied by renard38 on topic Re: Jimny
good place for off roading 
Please Log in or Create an account to join the conversation.
- darthloachie
- Topic Author
- New Member
-
Public
20 Feb 2012 12:42 - 20 Feb 2012 12:45 #33878
by darthloachie
Replied by darthloachie on topic Re: Darths Jimny
Heres a quick pic of the Jimny in its new defender extended arches courtesy of Zuki Andy 
as you can see ive taken off the bottom trim panels off the doors and looking for ideas to cover up the two rows of holes
I took them off to match the wings / new wheel arches and also the dorrs open fully now with out hitting the roll cage
any suggestions?
as you can see ive taken off the bottom trim panels off the doors and looking for ideas to cover up the two rows of holes
I took them off to match the wings / new wheel arches and also the dorrs open fully now with out hitting the roll cage
any suggestions?
Last edit: 20 Feb 2012 12:45 by darthloachie.
Please Log in or Create an account to join the conversation.
- adamatdraycott
- New Member
-
Public
- zuki andy
- New Member
-
Public
20 Feb 2012 13:18 #33884
by zuki andy
Replied by zuki andy on topic Re: Darths Jimny
Looking good, did you get to test there flexibility. 
Please Log in or Create an account to join the conversation.
- funkyjimny
-
- Offline
- Moderator
-
Registered
- 2004 jimny soft top, factory hardtop, ARB bumper
- darthloachie
- Topic Author
- New Member
-
Public
20 Feb 2012 13:34 #33888
by darthloachie
yes it was fine - the wheels never touched once despite my occasionally over ambitious driving
Replied by darthloachie on topic Re: Darths Jimny
zuki andy wrote: Looking good, did you get to test there flexibility.
yes it was fine - the wheels never touched once despite my occasionally over ambitious driving
Please Log in or Create an account to join the conversation.
Time to create page: 0.163 seconds