A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
You'll Never Believe This...!!
- Andy
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
22 Dec 2010 07:25 #7949
by Andy
Replied by Andy on topic Re: You'll Never Believe This...!!
yeah our dealer gets round that by offering you a one month bumper to bumper warranty followed by a 2 month 'bronze' warranty which is regulated and restricted by they're warranty schedule that they offer as an additional product up to 12 months on qualifying cars. hope i get a phone call today telling me lil jimny is all ok

Please Log in or Create an account to join the conversation.
- goatboy
- New Member
-
Public
Less
More
- Thank you received: 0
22 Dec 2010 08:59 #7952
by goatboy
Replied by goatboy on topic Re: You'll Never Believe This...!!
The fact it changes round corners would make me think it is a knackered or dried out CV joint on a driveshaft somewhere...
Please Log in or Create an account to join the conversation.
- doncarlyon
- New Member
-
Public
Less
More
- Thank you received: 0
24 Dec 2010 10:01 #8046
by doncarlyon
Replied by doncarlyon on topic Re: You'll Never Believe This...!!
Are the tyres in ok condition. Check the edges for "50p shape" wear...
Might not be that but its a problem on my Focus RS, rear camber causes the tyres to wear like 50p pieces causing a rumbling noise.
Might not be that but its a problem on my Focus RS, rear camber causes the tyres to wear like 50p pieces causing a rumbling noise.
Please Log in or Create an account to join the conversation.
- clyde
- New Member
-
Public
Less
More
- Thank you received: 0
29 Dec 2010 07:36 - 29 Dec 2010 07:39 #8265
by clyde
Replied by clyde on topic Re: You'll Never Believe This...!!
not a uv joint is it mate, i had an old landy that did some strange noises and the uv was wearing on the prop, sorry didnt see that 1st bit about it fluctuating around corners
Last edit: 29 Dec 2010 07:39 by clyde.
Please Log in or Create an account to join the conversation.
Time to create page: 0.292 seconds