BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Re:Who can identify this plug??? G13BB engine

More
31 Jan 2023 17:56 #247301 by Markiemark
Replied by Markiemark on topic Who can identify this plug??? G13BB engine
I can’t find this size plug in the parts catalogue though….Strange, right?

Please Log in or Create an account to join the conversation.

More
31 Jan 2023 21:47 #247306 by mlines
Replied by mlines on topic Re:Who can identify this plug??? G13BB engine

Markiemark wrote: I can’t find this size plug in the parts catalogue though….Strange, right?

09246-05006

Sent from my moto g42 using Tapatalk
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: Markiemark

Please Log in or Create an account to join the conversation.

More
01 Feb 2023 07:58 - 01 Feb 2023 08:03 #247309 by Markiemark
Replied by Markiemark on topic Re:Who can identify this plug??? G13BB engine
Hi Martin!

Must say: close! Very close….but only mine is 5,5mm length..and #3 part is 7,5mm and is in it’s place. But I surely would used the longer one, if needed.
I searched the Partsouq site for “Plug” and nothing found more in 9,5 or 10mm sizes…..

But thanx again!
Last edit: 01 Feb 2023 08:03 by Markiemark.

Please Log in or Create an account to join the conversation.

More
01 Feb 2023 08:20 #247311 by Markiemark
Replied by Markiemark on topic Re:Who can identify this plug??? G13BB engine
The given # is in the 5,5mm. length as well….

Please keep up the search!

Thanks again….

Please Log in or Create an account to join the conversation.

More
01 Feb 2023 11:24 - 01 Feb 2023 11:29 #247314 by mlines
Replied by mlines on topic Re:Who can identify this plug??? G13BB engine
 We are clearly looking at different sources.As I said, in my source 09246-05006 is 5.5mm 
[img
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Last edit: 01 Feb 2023 11:29 by mlines.

Please Log in or Create an account to join the conversation.

More
01 Feb 2023 17:41 #247319 by Markiemark
Replied by Markiemark on topic Re:Who can identify this plug??? G13BB engine
Well that doesn’t matter a lot, since this plug, as you mentioned, is in it’s place…I didn’t remove any plug from the (lower) engineblock….Only removed alternator, starter, intake and exhaust manifolds for removing the engine.
Later I pulled off the cilinderhead.
So it’s a pain now, to find out where that plug comes from….

Thanks Martin!

Please Log in or Create an account to join the conversation.

Time to create page: 0.147 seconds
Joomla template by a4joomla