A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

G16 Swap with Baleno harness and ECU, Tach and Speedo NC

Jim Jim
Topic Author
New Member
Public

29 Oct 2020 12:55 #229549 by Jim Jim

Replied by Jim Jim on topic G16 Swap with Baleno harness and ECU, Tach and Speedo NC

We have to maybe do a manual switch control for the 4WD system since the Balneo is not 4WD, so the ECU will not take any input orders from the 4WD module

Have to track down a throttle position sensor low signal fault code too then it will be working perfectly.

Please Log in or Create an account to join the conversation.

Jim Jim
Topic Author
New Member
Public

29 Oct 2020 14:01 #229553 by Jim Jim

Replied by Jim Jim on topic G16 Swap with Baleno harness and ECU, Tach and Speedo NC

Here are the pics Safari, from these you can easily understand what I did.

I also came up with a different idea for the right side engine mounting modification, pics of that too below.
.