A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Jimny 3 - 1st model front bumper in place of 3rd model
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2989
- Thank you received: 673
01 Jan 2020 18:03 #216896
by jackonlyjack
James
Replied by jackonlyjack on topic Jimny 3 - 1st model front bumper in place of 3rd model
He's in sarajevo bosnia and herzegovinaj999pre wrote: Hi. Did you get any further with this. I ask as I'm looking for a Gen 3 bumper and have a Gen 1 I could swap with you.
Whereabouts are you?
James
Please Log in or Create an account to join the conversation.
02 Jan 2020 18:24 #216945
by j999pre
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Replied by j999pre on topic Jimny 3 - 1st model front bumper in place of 3rd model
Oh poo. Ta Jack
Gold Jimny the best colour (sold)

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Please Log in or Create an account to join the conversation.
06 Jan 2020 07:00 #217039
by Bosanek
Replied by Bosanek on topic Jimny 3 - 1st model front bumper in place of 3rd model
Yes I am quite far away and one too many border and customs check away.
I did obtain a pair of suitable front end chassis metal caps for type 1-5 (for 1st model front bumper) from jackonlyjack (thanks again for that by the way), but I did not do anything with them yet because of the cold weather and because I have other priorities at the moment. I plan to do that during the spring time hopefully.
I did obtain a pair of suitable front end chassis metal caps for type 1-5 (for 1st model front bumper) from jackonlyjack (thanks again for that by the way), but I did not do anything with them yet because of the cold weather and because I have other priorities at the moment. I plan to do that during the spring time hopefully.
The following user(s) said Thank You: jackonlyjack
Please Log in or Create an account to join the conversation.
Time to create page: 0.203 seconds