A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Cv joints problem
- Uklilly95
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
8 years 2 months ago #195428
by Uklilly95
Cv joints problem was created by Uklilly95
Hi I taken apart the front hub and have taken the the cv joint and shaft out, i need to replace the cv joint but I can't find the ones I've got, they are 26 teath outside and 20 death on the inside I have counted the about 20 time and all I can find online is 26 and 19 please help thanks Luke
Please Log in or Create an account to join the conversation.
8 years 2 months ago #195430
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Cv joints problem
You need to count again
www.bigjimny.com/mediawiki/index.php?title=CV_joint_replacement
Sent from my Pixel 2 XL using Tapatalk
www.bigjimny.com/mediawiki/index.php?title=CV_joint_replacement
Sent from my Pixel 2 XL using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
- Uklilly95
- Topic Author
- New Member
-
Less
More
- Thank you received: 0
8 years 2 months ago #195431
by Uklilly95
Replied by Uklilly95 on topic Re:Cv joints problem
No best pic but you can still make it out and count
Please Log in or Create an account to join the conversation.
- mickt
- New Member
-
Less
More
- Thank you received: 0
8 years 2 months ago #195473
by mickt
Replied by mickt on topic Re:Cv joints problem
Not at the top section in that photo!
Please Log in or Create an account to join the conversation.
- TaterTot
- New Member
-
Less
More
- Thank you received: 0
8 years 2 months ago - 8 years 2 months ago #195476
by TaterTot
Replied by TaterTot on topic Cv joints problem
Last edit: 8 years 2 months ago by TaterTot.
Please Log in or Create an account to join the conversation.
8 years 2 months ago #195489
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Cv joints problem
Putting 2 and 2 together and perhaps getting 5 as the answer, you are not the person who just called asking about a CV for a Longfield shaft are you? In which case it might be a special, non-standard CV.
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Time to create page: 0.094 seconds
