A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
parking brake.
- rappey
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
04 Jun 2017 17:29 #181760
by rappey
parking brake. was created by rappey
My parking brake was superb, but had to change the shoes.. now i have so much slack in the cable?
I adjusted the shoes through the hole in the back of the drum as much as possible and they cant be adjusted anymore without binding on the drum, but the parking brake cable is still so slack, and from what ive read there is no adjuster on the cable?
What next?
I adjusted the shoes through the hole in the back of the drum as much as possible and they cant be adjusted anymore without binding on the drum, but the parking brake cable is still so slack, and from what ive read there is no adjuster on the cable?
What next?
Please Log in or Create an account to join the conversation.
04 Jun 2017 19:04 #181762
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:parking brake.
The main adjustment is on the drums you to you have been doing. However there is an adjuster at the handbrake end as well for minor tweaks
Sent from my Nexus 6P using Tapatalk
Sent from my Nexus 6P using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: rappey
Please Log in or Create an account to join the conversation.
Time to create page: 0.072 seconds
