A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Snorkel

j999pre
Offline
Platinum Member
Registered

22 Mar 2017 14:09 #179495 by j999pre

Replied by j999pre on topic Re:Snorkel

Plenty of room with the arch liner and air tube removed. Hardest bit is fitting the flexi hose to the square outlet. Best done prior to fitting. £60

Gold Jimny the best colour (sold)

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)

Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS

Please Log in or Create an account to join the conversation.

Riccy
Offline
Banned
Registered
J999 MNY Bashing around Carlisle

22 Mar 2017 20:33 #179531 by Riccy

Replied by Riccy on topic Re:Snorkel

j999pre wrote: Plenty of room with the arch liner and air tube removed. Hardest bit is fitting the flexi hose to the square outlet. Best done prior to fitting. £60

the air inlet squiggly thing in the wheel arch is a pain in the arse to get out and bin on a VVT jim, but inlet to airbox is round at leas. Being an electrician, not a mechanic, it took me nearly an hour to get that bugger out!

J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp

Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...

www.youtube.com/user/riclemus

Please Log in or Create an account to join the conversation.

Time to create page: 5.765 seconds

Snorkel

Events Menu