A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Replacing the R/H window switches in 2000 Jimny Ragtop
- ZookFastback
- Topic Author
- New Member
-
Public
19 Feb 2017 00:36 - 19 Feb 2017 00:37 #178182
by ZookFastback
The new switch has arrived. Here is the photo of it. I'm assuming that the original unit must be pushed back against the spring and then lifted from the front? Is this assumption correct?
The switch was only $14aud which I thought was particularly cheap. Think that is about 8 pound in English moolah. :silly:
Replacing the R/H window switches in 2000 Jimny Ragtop was created by ZookFastback
The new switch has arrived. Here is the photo of it. I'm assuming that the original unit must be pushed back against the spring and then lifted from the front? Is this assumption correct?
The switch was only $14aud which I thought was particularly cheap. Think that is about 8 pound in English moolah. :silly:
Last edit: 19 Feb 2017 00:37 by ZookFastback. Reason: Left amount out
Please Log in or Create an account to join the conversation.
Time to create page: 0.216 seconds