A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
2-lo switch video guide.
16 Jan 2017 14:55 #176880
by Busta
2-lo switch video guide. was created by Busta
I recently bought a new Jimny and needed to wire in a '2-lo' switch. Here is a very poorly made video of the simple process of installing said switch.
For those not already familiar, the switch allows you to control the front hubs independantly of the 4wd lever. The main benefit of this is to allow the use of low range in 2wd. It's great for trailer work, tight manoeuvres on grippy surfaces or doing donuts.
For those not already familiar, the switch allows you to control the front hubs independantly of the 4wd lever. The main benefit of this is to allow the use of low range in 2wd. It's great for trailer work, tight manoeuvres on grippy surfaces or doing donuts.
The following user(s) said Thank You: Halford, helijohn
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
Less
More
- Posts: 2994
- Thank you received: 674
16 Jan 2017 15:31 #176881
by jackonlyjack
Replied by jackonlyjack on topic 2-lo switch video guide.
very nice of you Busta 
now i don't have to search forum when explaining to people how to do it
i still need to do this on my latest jim so much fun can be had in snow with 2low
Jack

now i don't have to search forum when explaining to people how to do it

i still need to do this on my latest jim so much fun can be had in snow with 2low
Jack
Please Log in or Create an account to join the conversation.
- wilku
- New Member
-
Public
Less
More
- Thank you received: 0
19 Jan 2017 09:29 #176973
by wilku
Replied by wilku on topic 2-lo switch video guide.
Very nice explanation.
Put on WIKI maybe?
Put on WIKI maybe?
Please Log in or Create an account to join the conversation.
19 Jan 2017 10:49 #176979
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic 2-lo switch video guide.
Wiki updated

Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
The following user(s) said Thank You: wilku
Please Log in or Create an account to join the conversation.
- wilku
- New Member
-
Public
Less
More
- Thank you received: 0
19 Jan 2017 10:51 #176980
by wilku
Replied by wilku on topic 2-lo switch video guide.
Thanks Martin, though I try to encourage people to author the contents themselves... you know, like in a WIKI

Please Log in or Create an account to join the conversation.
19 Jan 2017 14:50 #177011
by mlines

Getting people to add to the Wiki is not easy.
Nice article appearing at present on the R72 gearbox from user "sheepish"
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic 2-lo switch video guide.

Getting people to add to the Wiki is not easy.
Nice article appearing at present on the R72 gearbox from user "sheepish"
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Time to create page: 0.990 seconds