A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Stripped Spark Plug Hole Threads
- overthetop
- Topic Author
- New Member
-

Public
Less
More
- Thank you received: 0
16 Apr 2016 12:33 #165401
by overthetop
Stripped Spark Plug Hole Threads was created by overthetop
Found 2 spark plugs loose when servicing the engine.
The threads in the alloy head appeared to be damaged.
I am looking for owners' experiences: having the threads repaired using helicoils (thread inserts).
There is enough head room above the plug holes for insitu repairs.
However, I would be concerned above swarf getting into the cylinders.
Any ideas of costs to have the threads repaired if it was to include taking off / refitting the cylinder head.
thanks for any advice given :blush:
The threads in the alloy head appeared to be damaged.
I am looking for owners' experiences: having the threads repaired using helicoils (thread inserts).
There is enough head room above the plug holes for insitu repairs.
However, I would be concerned above swarf getting into the cylinders.
Any ideas of costs to have the threads repaired if it was to include taking off / refitting the cylinder head.
thanks for any advice given :blush:
Please Log in or Create an account to join the conversation.
16 Apr 2016 18:59 #165418
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Stripped Spark Plug Hole Threads
There are a number of mobile thread repair companies who will come to you.
For example, here is one near me
www.threaddoctorservicesltd.co.uk
Sent from my Nexus 6P using Tapatalk
For example, here is one near me
www.threaddoctorservicesltd.co.uk
Sent from my Nexus 6P using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Time to create page: 0.077 seconds
