BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

rear propshaft uj question sj prop

  • gaz3359
  • Topic Author
  • New Member
  • New Member
    Public
More
25 Sep 2015 10:11 #152524 by gaz3359
rear propshaft uj question sj prop was created by gaz3359
So im running a sj front prop on the rear of my jimny for the sj transfer box.the uj at the diff has play can anyone guide me in the right direction as to what uj i will need as i cant remember if the prop is off a 410 or 413.seen a few uj's advertised saying that they fit both but want to be sure cheers

Please Log in or Create an account to join the conversation.

More
25 Sep 2015 10:33 #152525 by j999pre
Replied by j999pre on topic rear propshaft uj question sj prop
I'm in a similar boat the uj I got from sush has play in it but it's an internal c clip uj not external like the other end so I'm investigating once removed. The other prop I got is a 410 mini prop so can't be used either. Not my finest purchase! This is all I'm waiting on to finish the lobster install
Gold Jimny the best colour (sold) :(

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)

Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS

Please Log in or Create an account to join the conversation.

More
25 Sep 2015 10:41 #152526 by mlines
Replied by mlines on topic rear propshaft uj question sj prop
Sadly you need to identify the exact prop you have as the SJ range varied.

The most common one is identical to the one required for Jimny props and is here.... www.bigjimny.com/store/service-items-and...universal-joint.html

but make sure its what you need first
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

  • gaz3359
  • Topic Author
  • New Member
  • New Member
    Public
More
25 Sep 2015 12:19 #152530 by gaz3359
Replied by gaz3359 on topic rear propshaft uj question sj prop
Many thanks for the replys is there any way to tell what prop I've got ? If i measured the uj would that work ?

Please Log in or Create an account to join the conversation.

More
25 Sep 2015 18:37 #152543 by facade
Replied by facade on topic rear propshaft uj question sj prop
A standard jimny UJ is QL219 or ql529 ( with a grease nipple) Blueprint equivalent ADK83901

size is 25mm cup dia x 63.8 mm between the outer edges of the caps (the distance between the circlips on the outside of the joint).


The sj 410 is listed as QL11009 which is 25mm cup dia and 40mm between the internal circlips = inside the yoke on grooves in the caps (very weird.)

There are only the two listed in my old QH catalogue.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there :)

Please Log in or Create an account to join the conversation.

More
25 Sep 2015 19:34 - 25 Sep 2015 19:35 #152551 by mlines
Replied by mlines on topic rear propshaft uj question sj prop
There are

25mm x 63.8mm (the more popular one and the one in my store)
23.82 x 61.30mm

plus I am sure there was an earlier SJ410 one on the skinny propped on with the early transfer box but I cannot see that one listed.
Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Last edit: 25 Sep 2015 19:35 by mlines.

Please Log in or Create an account to join the conversation.

Time to create page: 4.751 seconds
Joomla template by a4joomla