A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Rear drive shaft spacer. Do you need to fit one when fitting the jimnybits 3" full lift kit?
I have fitted the supplied spacer between the transfer box and front prop shaft but have been told I need to fit on to the rear also. From your experience is this required when using the HD radius arms.
I ran my Jimny with a 3" lift, no castor correction and no prop spacers for quite some time and had the axles fully twisted up and the shocks at full droop with no issues at all.
So in short, no.
Kirkynut
The underdog often starts the fight, and occasionally the upper dog deserves to win - Edgar Watson Howe.
