A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
King pin replacement what do I need?
- jim
- Topic Author
- New Member
-
Public
- Daniel30
- New Member
-
Public
29 Aug 2015 17:04 #150922
by Daniel30
Replied by Daniel30 on topic King pin replacement what do I need?
I didn't have to change mine but I suppose it's dependant on your jimny, some good grease is important 
Please Log in or Create an account to join the conversation.
- jim
- Topic Author
- New Member
-
Public
29 Aug 2015 17:10 #150923
by jim
I think they are less likely to need replacing. Unfortunately waterproof grease is out of stock but due in soon.
Replied by jim on topic King pin replacement what do I need?
Daniel30 wrote: I didn't have to change mine but I suppose it's dependant on your jimny, some good grease is important
I think they are less likely to need replacing. Unfortunately waterproof grease is out of stock but due in soon.
Please Log in or Create an account to join the conversation.
- gusthegorilla
- New Member
-
Public
29 Aug 2015 17:49 #150926
by gusthegorilla
If you're desperate for waterproof, you can get it in a ship's chandlers if you're anywhere near the coast
Replied by gusthegorilla on topic King pin replacement what do I need?
jim wrote:
Daniel30 wrote: I didn't have to change mine but I suppose it's dependant on your jimny, some good grease is important
I think they are less likely to need replacing. Unfortunately waterproof grease is out of stock but due in soon.
If you're desperate for waterproof, you can get it in a ship's chandlers if you're anywhere near the coast
Please Log in or Create an account to join the conversation.
29 Aug 2015 18:15 #150928
by Halford
Replied by Halford on topic King pin replacement what do I need?
Please Log in or Create an account to join the conversation.
29 Aug 2015 21:12 #150938
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic King pin replacement what do I need?
Waterproof grease was shipped to me last week but seems to be in the postal system somewhere 
Could arrive anytime
Could arrive anytime
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Time to create page: 0.744 seconds