A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Factory diesel Jimnys (DDiS) - all info about them

More
06 Mar 2017 14:25 - 06 Mar 2017 14:26 #178874 by Bosanek
I am informing the public that I wrote a (very) comprehensive article on DDiS Jimny specifics, which now exists in the BigJimny wiki:
www.bigjimny.com/mediawiki/index.php/Die...S%29_Jimny_specifics


That wiki article contains all of the useful information which was written in this forum topic, and much more than that.

I thank a lot to forum user Decklandpt for his contributions to this topic, which have been included into the wiki as well.


I will write any future additions to the topic of DDiS Jimnys in that wiki article, and not here anymore.



P.S.:
Regarding the last issue which I had with my DDiS Jimny (described in the previous few posts), here is a short report on its resolution:

It turned out to be two unrelated issues at once
1. A bad camshaft sensor (that's why the engine would not start sometimes)
2. A bad fuel pressure regulator ("inlet metering valve"). The fuel pressure regulator is part of the fuel pump, in the "low pressure" portion of the fuel delivery system. With a brand new replacement part (the same manufacturer and part number - Delphi 9109-903), i still get the same buzzing sound (the mechanics told me it's just a normal sound of an actuator moving around), but no engine fault signals any more.
Last edit: 06 Mar 2017 14:26 by Bosanek.

Please Log in or Create an account to join the conversation.

Time to create page: 0.169 seconds
Joomla template by a4joomla