BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Wheel stud

  • Solas
  • Topic Author
  • New Member
  • New Member
    Public
More
08 Aug 2015 18:32 #149429 by Solas
Wheel stud was created by Solas
Tightening up the wheels today after changing them and snap! Wheel stud gone. I have 32mm spacers so it's one of the adapter studs, anyone know where I can buy a couple?

Please Log in or Create an account to join the conversation.

  • irishguy123
  • New Member
  • New Member
    Public
More
08 Aug 2015 18:52 #149434 by irishguy123
Replied by irishguy123 on topic Wheel stud
If they're 32mm I think they're probably these ones from Jimny Bits: www.jimnybits.co.uk/shop/wheel-nuts-bolt...n-studs/prod_72.html

Please Log in or Create an account to join the conversation.

  • Solas
  • Topic Author
  • New Member
  • New Member
    Public
More
08 Aug 2015 20:43 #149455 by Solas
Replied by Solas on topic Wheel stud

irishguy123 wrote: If they're 32mm I think they're probably these ones from Jimny Bits: www.jimnybits.co.uk/shop/wheel-nuts-bolt...n-studs/prod_72.html



Ordered! Thanks again for the help lads!

Please Log in or Create an account to join the conversation.

  • Solas
  • Topic Author
  • New Member
  • New Member
    Public
More
11 Aug 2015 14:22 - 11 Aug 2015 14:44 #149638 by Solas
Replied by Solas on topic Wheel stud

Rhinoman wrote: Was it over-tightened? I would be concerned, if the other studs are stretched then you could end up with a wheel coming adrift.



Not sure, think I may have over tightened it! Now you got me concerned! Anyone know what the torque setting are for wheel studs?
Last edit: 11 Aug 2015 14:44 by Solas. Reason: Miss spelled duh!

Please Log in or Create an account to join the conversation.

  • gusthegorilla
  • New Member
  • New Member
    Public
More
11 Aug 2015 17:13 #149642 by gusthegorilla
Replied by gusthegorilla on topic Wheel stud
Normally 95nm, Solas...I assume you mean for the wheel nuts

Gus :)

Please Log in or Create an account to join the conversation.

  • Solas
  • Topic Author
  • New Member
  • New Member
    Public
More
12 Aug 2015 10:49 #149674 by Solas
Replied by Solas on topic Wheel stud
Thanks Gus, will torque them up to day! Doing an 80 mile commute just now so really don't fancy a wheel passing me.

Please Log in or Create an account to join the conversation.

Time to create page: 0.132 seconds
Joomla template by a4joomla