A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Altering driver door trim.
03 Jul 2015 19:24 - 03 Jul 2015 20:16 #147134
by furo
2004 Jimny Mode: General Grabber AT3s (215/75/R15); Trailmaster 2" Lift; Jimnybits Snorkel; Jimnybits Front and Rear Recovery Points; Suntop Roof Rack; AVM Manual Hubs; Stainless Steel Exhaust System (SOLD)
Altering driver door trim. was created by furo
Hi folks!
I was just wondering if anyone has any experience with modifying the driver door trim, in particular removing the section with the window controls and making it flush with the rest of the trim? Also removing the armrest would be helpful. I'm a pretty big guy and I'm struggling a little with my knee banging on the window control panel and my elbow banging on the arm rest.
I've attached a couple of photos to show the bits I mean.
Thanks a lot for your time!
I was just wondering if anyone has any experience with modifying the driver door trim, in particular removing the section with the window controls and making it flush with the rest of the trim? Also removing the armrest would be helpful. I'm a pretty big guy and I'm struggling a little with my knee banging on the window control panel and my elbow banging on the arm rest.
I've attached a couple of photos to show the bits I mean.
Thanks a lot for your time!
2004 Jimny Mode: General Grabber AT3s (215/75/R15); Trailmaster 2" Lift; Jimnybits Snorkel; Jimnybits Front and Rear Recovery Points; Suntop Roof Rack; AVM Manual Hubs; Stainless Steel Exhaust System (SOLD)
Last edit: 03 Jul 2015 20:16 by furo.
Please Log in or Create an account to join the conversation.
04 Jul 2015 04:46 - 04 Jul 2015 05:32 #147144
by Halford
Replied by Halford on topic Altering driver door trim.
Doh :blink: just hit thank you instead of reply ... hate doing this on my phone.
Better off making some seat extenders ....
see here
Search "seat extensions site:bigjimny.com"
Better off making some seat extenders ....
see here
Search "seat extensions site:bigjimny.com"
Last edit: 04 Jul 2015 05:32 by Halford.
Please Log in or Create an account to join the conversation.
- Tadpole
- New Member
-
Public
04 Jul 2015 06:14 - 04 Jul 2015 06:16 #147145
by Tadpole
Replied by Tadpole on topic Altering driver door trim.
Same idea, gives you a '2" lift' ........... plus more leg room ....
www.bigjimny.com/index.php/forum?view=topic&catid=6&id=52029
www.bigjimny.com/index.php/forum?view=topic&catid=6&id=52029
Last edit: 04 Jul 2015 06:16 by Tadpole.
Please Log in or Create an account to join the conversation.
- gaz3359
- New Member
-
Public
04 Jul 2015 14:53 #147176
by gaz3359
Replied by gaz3359 on topic Altering driver door trim.
Mine bit duct tape and hacksaw was all that was needed 
Please Log in or Create an account to join the conversation.
04 Jul 2015 15:01 #147177
by Halford
Replied by Halford on topic Altering driver door trim.
:laugh: :laugh: :laugh:
That's so money-supermarket Gaz
(UK joke only)
That's so money-supermarket Gaz
(UK joke only)
Please Log in or Create an account to join the conversation.
Time to create page: 0.197 seconds