A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Front end click in 4x4

Steveolkinevel
Topic Author
New Member
Public

28 Mar 2015 11:10 - 28 Mar 2015 11:12 #141511 by Steveolkinevel

Front end click in 4x4 was created by Steveolkinevel

Hi all I have fixed hubs on my Jim and driving around in 2wd (with all front axel turning) it's brill no knocks or bangs but as soon as its in 4wd and I turn I get a horrendous click from the front end, both sides, I thought cv joint but would it not do this in 2wd aswell? I tested on a very loose surface too,
Also tried reversing a good few yards incase of twu, but still the same.

Any help would be brill cheers

Last edit: 28 Mar 2015 11:12 by Steveolkinevel.

Please Log in or Create an account to join the conversation.

Busta
Offline
Platinum Member
Registered

28 Mar 2015 11:14 #141513 by Busta

Replied by Busta on topic Front end click in 4x4

Sounds like a CV. In 2wd, even though the CV is turning there is no load on it so it will not click.

Please Log in or Create an account to join the conversation.

Time to create page: 0.291 seconds

Front end click in 4x4

Events Menu