BigJimny Store
A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

m13a PAS belt?

  • jonesyba420
  • Topic Author
  • New Member
  • New Member
    Public
More
13 Mar 2014 19:04 #108464 by jonesyba420
m13a PAS belt? was created by jonesyba420
What belt?

Got one from euros today 4pk850...............................and it doesnt fit.

Please Log in or Create an account to join the conversation.

More
13 Mar 2014 19:11 #108468 by j999pre
Replied by j999pre on topic m13a PAS belt?
Odd I'm sure i just fitted one that size on an m13a
Gold Jimny the best colour (sold) :(

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)

Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS

Please Log in or Create an account to join the conversation.

  • jonesyba420
  • Topic Author
  • New Member
  • New Member
    Public
More
13 Mar 2014 19:14 #108471 by jonesyba420
Replied by jonesyba420 on topic m13a PAS belt?
Had the tensioner fully loose and it just wouldnt quite go on :evil:

How did you get it on?

Please Log in or Create an account to join the conversation.

More
13 Mar 2014 19:27 - 13 Mar 2014 19:41 #108474 by j999pre
Replied by j999pre on topic m13a PAS belt?

Did you undo both the nut and the bolt? I used a hex then to swivel the tensioner and it just slipped on.
Gold Jimny the best colour (sold) :(

Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)

Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Attachments:
Last edit: 13 Mar 2014 19:41 by j999pre.

Please Log in or Create an account to join the conversation.

  • jonesyba420
  • Topic Author
  • New Member
  • New Member
    Public
More
13 Mar 2014 20:00 #108483 by jonesyba420
Replied by jonesyba420 on topic m13a PAS belt?
Yep did exactly that, wouldnt go on for s#$t!

Please Log in or Create an account to join the conversation.

  • Tadpole
  • New Member
  • New Member
    Public
More
13 Mar 2014 20:19 #108485 by Tadpole
Replied by Tadpole on topic m13a PAS belt?
I changed my belts with ease once the hex alternator bolt was freed off using these M13A 2003 hth .............. :dry:

Auxiliary Belts

Alternator size 4PK 835
Power Steering 4PK 854

Please Log in or Create an account to join the conversation.

Time to create page: 0.182 seconds
Joomla template by a4joomla