A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Transfer box reduction gearset

  • minare
  • Topic Author
  • New Member
  • New Member
More
12 years 8 months ago - 12 years 8 months ago #105838 by minare
Transfer box reduction gearset was created by minare
Hey All,

I have jimny 09 vvt auto
i consider using a Transfer Case reduction gearset for transfer in order to use 235/75/15 tires.
the only ratio for my car is 25%.
does someone here have an experience with this configuration?
what do you think about 25% reduction when using only 10% bigger tire for the auto.

thanks
Guy
Last edit: 12 years 8 months ago by mlines. Reason: Remove manufacturers name

Please Log in or Create an account to join the conversation.

More
12 years 8 months ago - 12 years 8 months ago #105840 by mlines
I keep editing your posts. The manufacturer whose name you are using in your posts has written to me with a legal letter preventing me from any reference to their name on this website.

Please do not keep posting their name.

You may discuss the product without naming the company.

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Last edit: 12 years 8 months ago by mlines.

Please Log in or Create an account to join the conversation.

  • TomDK
  • New Member
  • New Member
More
12 years 8 months ago #105845 by TomDK
Replied by TomDK on topic Transfer box reduction gearset
Hi Martin,

I can only guess this an Italian company :)
But can they do this? Threaten you with legal actions and what not?

I'd say we are free do discuss any manufacturers products as we like.

Please Log in or Create an account to join the conversation.

More
12 years 8 months ago #105850 by mlines
I don't think they can, but they can send me a letter.

I then had a think about it and decided that if I obeyed the letter then it would actually affect them more than if I ignored it. This was because the wording stated that I should remove ANY mention of their name and any links to their website.

This means I have to remove not only statements which state a negative opinion of their products BUT ALSO statements which endorse their products, therefore to use an English phrase "they have shot themselves in the foot".

And I guess that any member should consider why a company would not like free speech on their products.

Martin

2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses

Please Log in or Create an account to join the conversation.

  • GuardianAngel
  • New Member
  • New Member
More
12 years 8 months ago #105853 by GuardianAngel
Replied by GuardianAngel on topic Transfer box reduction gearset
Does seem very odd Martin but I have seen this before in other hobbies I take part in :O

Please Log in or Create an account to join the conversation.

  • Hastiekid
  • New Member
  • New Member
More
12 years 8 months ago - 12 years 8 months ago #105858 by Hastiekid
Replied by Hastiekid on topic Transfer box reduction gearset
Strange one that, I have one of their gear sets and love it. Cut your nose off to spite your face!!!

BUT on a more serious note I have just had a look and several of my posts have been edited. To be honest Im not that happy it has been done without a footer explaining this or a PM to tell me. I know its YOUR page but as far as Im concerned it was MY post and MY opinions. If you and the company have Beef thats up to you not forum users.
Last edit: 12 years 8 months ago by Hastiekid.

Please Log in or Create an account to join the conversation.

Time to create page: 0.093 seconds
Joomla template by a4joomla

We use cookies

We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.
CookieHint and Consent by reDim GmbH (Opens in a new window)