A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
decat jimny and mot test
- 410shotgun
- Topic Author
- New Member
-
Public
- Bazcam
- New Member
-
Public
05 Feb 2014 20:37 #103553
by Bazcam
Replied by Bazcam on topic decat jimny and mot test
Cool, that's good to hear.
One of our jimny's had an annoying rattle at the manifold, turned out
the cat had started falling to bits, big chunks of a honey comb type material
were rattling about when it was revved.
We chopped it in half and removed everything and welded it back up, with the
heat shield back on you'd never know.
Should be ok for the test then
One of our jimny's had an annoying rattle at the manifold, turned out
the cat had started falling to bits, big chunks of a honey comb type material
were rattling about when it was revved.
We chopped it in half and removed everything and welded it back up, with the
heat shield back on you'd never know.
Should be ok for the test then
Please Log in or Create an account to join the conversation.
- wombat
- New Member
-
Public
05 Feb 2014 21:14 #103557
by wombat
Replied by wombat on topic decat jimny and mot test
If a vehicle is fitted with a cat as standard and it has been removed,it should fail an mot test even if it still passes the emissions test 
Please Log in or Create an account to join the conversation.
- 410shotgun
- Topic Author
- New Member
-
Public
- wombat
- New Member
-
Public
- 410shotgun
- Topic Author
- New Member
-
Public
Time to create page: 0.140 seconds