A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Tyre Sizes - Rough Guide Thread
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
09 Aug 2025 15:50 #261549
by jackonlyjack
Replied by jackonlyjack on topic Tyre Sizes - Rough Guide Thread
This spot could be the source of the rubbing
Chassis front body mounts see how I have bent it forwards.
This is a picture of my 32" tyre on a 2" lift with JB23 wings
0 off set
Has for reference my wheel base is 2273mm standard is 2250
I have gained the extra length because I have front and rear +3" radius arms fitted
The last picture is when my rear spring broke and is sitting on the bump stop
I have front and rear +2“ extended bump stops
Chassis front body mounts see how I have bent it forwards.
This is a picture of my 32" tyre on a 2" lift with JB23 wings
0 off set
Has for reference my wheel base is 2273mm standard is 2250
I have gained the extra length because I have front and rear +3" radius arms fitted
The last picture is when my rear spring broke and is sitting on the bump stop
I have front and rear +2“ extended bump stops
Please Log in or Create an account to join the conversation.
Time to create page: 0.206 seconds