A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Van conversion
- Sammy5158
- Topic Author
- New Member
-
Public
- UKDAN
- New Member
-
Public
24 Nov 2013 18:47 #92982
by UKDAN
Is that mudmans jim ?
Dan
Replied by UKDAN on topic Re:Van conversion
MysticRich wrote: Hi their
Mate had a kap built jimny with the windows done and all it was is the rear glass removed and replaced with steel which was stuck in place with mastic and painted.
Is that mudmans jim ?
Dan
Please Log in or Create an account to join the conversation.
- UKDAN
- New Member
-
Public
- jonathan
- New Member
-
Public
- piprice
- New Member
-
Public
- jonesyba420
- New Member
-
Public
25 Nov 2013 10:54 #93078
by jonesyba420
Replied by jonesyba420 on topic Van conversion
I got my back 3 tinted professionaly for £80 just shows its who you know not what you know 
heat gun on a low heat use a credit card or similar to smooth it out,start from the middle and work out. Im not sure if you use water or not when applying vinyl but im sure theres vids on youtube showing how to do it.
heat gun on a low heat use a credit card or similar to smooth it out,start from the middle and work out. Im not sure if you use water or not when applying vinyl but im sure theres vids on youtube showing how to do it.
Please Log in or Create an account to join the conversation.
Time to create page: 0.208 seconds