A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Diff Seals? Bearings? Both?..
- Grizzly
- Topic Author
- New Member
-
Public
- supergaz
- New Member
-
Public
- Grizzly
- Topic Author
- New Member
-
Public
22 May 2013 21:01 #71419
by Grizzly
I did look in the shop but it says they're out of stock.
Cheers for that Martin, I'll drop him a message, see what he's wanting to do with them
Replied by Grizzly on topic Bearings
supergaz wrote: Right here in the bigjimny shop!
I did look in the shop but it says they're out of stock.
mlines wrote: Due to a cock up on my behalf, smoggy has an extra pair of kingpin bearings that he didn't ask for. I have asked him to hold onto them so hat rather than send them back to me he can send them on to a customer in need. Therefore it maybe possible to have the set he has.
Martin
Sent from my HP Slate 7 using Tapatalk HD
Cheers for that Martin, I'll drop him a message, see what he's wanting to do with them
Please Log in or Create an account to join the conversation.
- Grizzly
- Topic Author
- New Member
-
Public
25 May 2013 14:56 #71698
by Grizzly
Replied by Grizzly on topic Diff Seals? Bearings? Both?..
5 hours later and both kingpins have ben replaced... Looking at the state of some of the bolts, they've not been off the vehicle for quite a while, maybe forever :huh:
Just checked under the 'Green Machine' after the drive home and all seem's good
Just checked under the 'Green Machine' after the drive home and all seem's good
Please Log in or Create an account to join the conversation.
- GuardianAngel
- New Member
-
Public
25 May 2013 16:34 #71707
by GuardianAngel
Replied by GuardianAngel on topic Re: Diff Seals? Bearings? Both?..
Good work
Please Log in or Create an account to join the conversation.
Time to create page: 0.197 seconds