A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Re: teething problems
- Lemsip81
- New Member
-
Less
More
- Thank you received: 0
7 years 5 months ago #209148
by Lemsip81
That’s exactly my worry. Anyone tried any kind of heat? Thinking boiling water or possibly a heat gun onto the threaded bit on show
Sent from my iPad using Tapatalk
Replied by Lemsip81 on topic teething problems
Lambert wrote: Persistent gentle persuasion. Be careful.
That’s exactly my worry. Anyone tried any kind of heat? Thinking boiling water or possibly a heat gun onto the threaded bit on show
Sent from my iPad using Tapatalk
Please Log in or Create an account to join the conversation.
- Max Headroom
-
- Offline
- Banned
-
- OPEN AIR MOTORING... 93 MILLION MILES OF HEADROOM
Less
More
- Posts: 1091
- Thank you received: 216
7 years 5 months ago #209152
by Max Headroom
IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS
Replied by Max Headroom on topic teething problems
I had a new clutch put in mine not long ago - went to Mr. Clutch - it didnt break the bank and its been perfectly good ever since
They had it done in just over a morning
They had it done in just over a morning
IF IT AINT BROKE, KEEP FIXING IT UNTIL IT IS
Please Log in or Create an account to join the conversation.
Time to create page: 0.080 seconds
