A place for more technical discussions. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Valve clearances

Dan.1298cc
Topic Author
New Member
Public

25 Jan 2011 15:37 #10338 by Dan.1298cc

Valve clearances was created by Dan.1298cc

Hi, I'v got a 99 T single cam jimny that needs the tappits setting up, can any one tell me what size feeler gauges I will need to set my inlet and outlet valves, thanks

Please Log in or Create an account to join the conversation.

p1ngu32
New Member
Public

25 Jan 2011 21:08 #10362 by p1ngu32

Replied by p1ngu32 on topic Re: Valve clearances

Hi, on a cold engine, intake 0.13mm - 0.17mm or 0.005 - 0.007in. exhaust 0.23 - 0.27mm or 0.009 - 0.011in.

Its all in the workshop manual including the procedure which can be downloaded free.

Please Log in or Create an account to join the conversation.

ypvs jimny 350
New Member
Public

25 Jan 2011 21:49 #10363 by ypvs jimny 350

Replied by ypvs jimny 350 on topic Re: Valve clearances

get it down on paper dan:laugh: and dont for get u will need a new gasket as well .

Please Log in or Create an account to join the conversation.

Time to create page: 0.840 seconds

Valve clearances

Events Menu