A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

Lights Problem Gen 3 2004.

Jimmy
Topic Author
Offline
New Member
Registered

12 May 2026 13:19 #264412 by Jimmy

Lights Problem Gen 3 2004. was created by Jimmy

Hello! After dismantling front/rear bumpers and reasemmbly, only the offside front lights work? No brake lights or rear indicators but front indicators flash quickly - Spots are ok.
There was a tow bar which i disconnected. Any ideas please please please! thanks

Please Log in or Create an account to join the conversation.

fordem
Offline
Platinum Member
Registered

12 May 2026 15:26 #264413 by fordem

Replied by fordem on topic Lights Problem Gen 3 2004.

I'd be "re-checking" the work done, looking for "forgotten connectors" and/or damaged wiring.

Side lights front & rear are on one circuit, so if you have just the offside front working, it's not a fuse or switch issue.

Front & rear indicators on each side are one circuit, so if you have front indicators flashing, it's not going to be a fuse, flasher or switch issue, and the flashers do flash rapidly to let you know there is a lamp out.

Brake lights are on a separate circuit, but, with what you're describing, it's highly likely to be wiring issues for all the different circuits.

Please Log in or Create an account to join the conversation.

Time to create page: 0.153 seconds

Lights Problem Gen 3 2004.

Events Menu