A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Passenger window switch broken
04 Sep 2023 05:49 - 04 Sep 2023 05:54 #250652
by yakuza
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Replied by yakuza on topic Passenger window switch broken on my Jimny 2002 (M13A)
I would just flip out the switch panel from the door, on the original panel the clips are at the ends. measure to see if there is a 12V there allready and go from there. use the wiring diagram to see what wires goes to the window motor.
Not so easy if it has been fiddled with before and is not original though.
Would strongly recommend trying to get it back to the original state as it is way more predictable then. switch panels are not expensive and can be found used.
Found it on ebay easy (Jimny door switch) but cannot recommend ordering this from China. But that is the low budget alternative.
Do check the button on the end there as Lambert says
Not so easy if it has been fiddled with before and is not original though.
Would strongly recommend trying to get it back to the original state as it is way more predictable then. switch panels are not expensive and can be found used.
Found it on ebay easy (Jimny door switch) but cannot recommend ordering this from China. But that is the low budget alternative.
Do check the button on the end there as Lambert says
Norway 2005 Jimny M16A VVT, 235 BFG MT, 2" Trailmaster, ARB rear lck, 17%/87% high/low gears.
Last edit: 04 Sep 2023 05:54 by yakuza.
Please Log in or Create an account to join the conversation.
- Zen76
- Topic Author
- New Member
-
Public
Time to create page: 0.177 seconds