A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

back door getting stiff to open and close

More
22 Jun 2023 05:06 #249587 by driver9
The hinges on the Gen 4 have covers fitted which provides  protection from water ingess into the top of the hinge.  May be these could be modified to fit the Gen 3.  I have fitted internal covers which also help to stop water ingress.

Please Log in or Create an account to join the conversation.

More
22 Jun 2023 12:45 #249593 by Velocette
This is the way to do it. On my gen 3 I drilled a 1mm hole in the central fixed part of the hinge and use a needle point grease gun with a 50/50 mix of moly grease and oil, Seal the job with a smear of wheel bearing grease and your hinges will last forever. Make sure you drill the hole in a position that it reachable by the grease gun by offering to the hinge first and its obvious where the right place is.

Please Log in or Create an account to join the conversation.

Time to create page: 0.109 seconds
Joomla template by a4joomla
We use cookies to give you the best online experience. Please let us know if you agree to all of these cookies. Accepting the Cookies also accepts the Disclaimers for the website.