Old Man Emu fitting near Guildford area

Thank you Soeley for your replies. I’m really keen to get this set up, as the Jimny is now my only car and work commitments require me to travel 80 miles twice a week. Based on people’s experiences that I’ve read on here, on-road driving has improved significantly, albeit likely due to the uprated shock absorbers. I might order from the links you provided.
Thanks Martin for reminding me about Challenger 4x4 in Tongham. They fitted my tree sliders for my Heritage in 2015. Good knowledgeable guys. Their neighbours gave me evils though as parking was along the road.
Will update when I get this done.
Thanks again and keep safe.
Marc

So today I fitted Bilstein shock absorbers from Jimnystyle. It took me 4 hours as I took my time understanding what I was supposed to be doing, with safety the primary focus. Instead of jack stands, I used a stack of 2ft long sleepers, with a trolley jack as back up. Straightforward process, albeit fiddly for the right-rear corner as there 's a wiring mount that needed to be unbolted and set aside to enable access to the top shock absorber mount. All bolts torqued to 90Nm, apart from the front top nut that I tightened just enough to compress the rubber bushing.
Took it for a 40 mile drive straight after and I am happy with the way it handles. Not as much dip when going around corners, and just a more stable drive.
I replaced the shocks only as I don't need the lift, for now.