A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
ABS sensor bolt size?
- Jimx5
- New Member
-
Public
07 May 2020 07:46 #221975
by Riccy
Use insulation tape. wrap it around and around until you get a snug fit
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Replied by Riccy on topic ABS sensor bolt size?
Jimx5 wrote: I have replaced kingpin bearings and seals to both sides recently and in doing so destroyed the plastic collars for both sensors, i have had no problems by just fitting the sensors centrally.
But if anybody has a link or a cobble together of the collars i would be grateful.
Dave.
Use insulation tape. wrap it around and around until you get a snug fit
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
07 May 2020 17:27 #221995
by j999pre
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Replied by j999pre on topic ABS sensor bolt size?
I drill through and use a nut and bolt. No issue next time round
Gold Jimny the best colour (sold)
Big red Jimny 32" tyres, arbs, cage 5:1 transfer etc. (Sold)
Grey pick up Jimny
Turbo m13a, arbs, floating rear shafts, disc conversion rear, vented front conversion. 245 70 16. Winch, 3" lift, 4:16 trans hd shafts and CVS
Please Log in or Create an account to join the conversation.
- NickR
- Topic Author
- New Member
-
Public
11 May 2020 09:09 #222126
by NickR
Replied by NickR on topic ABS sensor bolt size?
Just to add a note in case it helps anyone out. My apprentice replaced the kingpins on the other side over the weekend, and sheared the other ABS bolt exactly as I had showed her how to!!
But, if you can get the old one out and clean the M6 threads, and you are replacing the swivel seal bolts as I was, then the old oil seal bolts are a perfect fit and length! That gave me plenty of spares to use
Both plastic collars broke where they are very narrow (why are they quite so fragile!!), but managed to re-use them. +1 for stocking them as spares.
Nick
But, if you can get the old one out and clean the M6 threads, and you are replacing the swivel seal bolts as I was, then the old oil seal bolts are a perfect fit and length! That gave me plenty of spares to use
Both plastic collars broke where they are very narrow (why are they quite so fragile!!), but managed to re-use them. +1 for stocking them as spares.
Nick
Please Log in or Create an account to join the conversation.
Time to create page: 2.007 seconds