A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Help - Roll Cage Install....
11 Apr 2020 14:47 #220950
by X8GGY
Replied by X8GGY on topic Help - Roll Cage Install....
This is one of my old Vitaras - "Superzuki" that started this obsession of mine - with a cage that went though the top of the A-pillars...
The end of the tubes sat on steel plate bolted to the top of the wings. with the outer skin neatly trimmed around the tubes...
That prompted JackOnlyJack to ask for these questions of the landing area -
Might help?
Most people have them external and running down to a sill side bar, but I've (personally) never like the "climbing frame" look...
The end of the tubes sat on steel plate bolted to the top of the wings. with the outer skin neatly trimmed around the tubes...
That prompted JackOnlyJack to ask for these questions of the landing area -
Might help?
Most people have them external and running down to a sill side bar, but I've (personally) never like the "climbing frame" look...
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
11 Apr 2020 14:58 #220952
by jackonlyjack
Replied by jackonlyjack on topic Help - Roll Cage Install....
This is what i was thinking about sniper
square 5-6mm plate in purple
then bar welded to it
also thinking of bolting plate to the part of A pillar
it's a bit rough but you get the idea
square 5-6mm plate in purple
then bar welded to it
also thinking of bolting plate to the part of A pillar
it's a bit rough but you get the idea
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
Time to create page: 0.149 seconds