A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
Bent rear door.
- 1066Boy
- Topic Author
- New Member
-
Public
11 Apr 2018 18:19 #191585
by 1066Boy
Bent rear door. was created by 1066Boy
Ok hears a question for all you Jimny people. Recently I did a competition. Part of it included crossing a stream. As I dropped in, my spare wheel hit the bank and bent the door. 
I have bent the top back in by hand and its close enough. The bottom is bent outwards a little (enough to put the boot open light on) so the bottom left courner needs bending back in about 1-2". Ideas about the best why to achieve this? Thanks Allan.
I have bent the top back in by hand and its close enough. The bottom is bent outwards a little (enough to put the boot open light on) so the bottom left courner needs bending back in about 1-2". Ideas about the best why to achieve this? Thanks Allan. Please Log in or Create an account to join the conversation.
- helijohn
- New Member
-
Public
11 Apr 2018 19:01 #191591
by helijohn
Depends on how cosmetically good you want the result to be but I'd use brute force. I'd possibly find a wall and with some 4x4 timber against the wall and a bit of lever work then reverse into the wall.
Replied by helijohn on topic Bent rear door.
1066Boy wrote: Ok here's a question for all you Jimny people. Recently I did a competition. Part of it included crossing a stream. As I dropped in, my spare wheel hit the bank and bent the door.
Depends on how cosmetically good you want the result to be but I'd use brute force. I'd possibly find a wall and with some 4x4 timber against the wall and a bit of lever work then reverse into the wall.
Please Log in or Create an account to join the conversation.
- 1066Boy
- Topic Author
- New Member
-
Public
- helijohn
- New Member
-
Public
Time to create page: 0.223 seconds