A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Castor Adjustable Radius Arms
Less
More
- Posts: 764
- Thank you received: 227
11 Jan 2017 03:13 #176547
by zukebob
I started out with nothing & still have most of it left
Castor Adjustable Radius Arms was created by zukebob
I started out with nothing & still have most of it left
Please Log in or Create an account to join the conversation.
11 Jan 2017 07:46 #176552
by mlines
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Replied by mlines on topic Re:Castor Adjustable Radius Arms
As the radius arms are subject to very large forces when in use I would be concerned about the strength, however it's an interesting idea
Sent from my Nexus 6P using Tapatalk
Sent from my Nexus 6P using Tapatalk
Martin
2003 M13 early KAP build.
3" Trailmaster lift with 1.5 Spacers on front
Customised winch bumper and roll cage
235/85R16 Maxxis Bighorns on 16" Rims, 4:1 Rocklobster, Rear ARB locker and on-board air
Corrected arms all-round, rear disks, Recaro seats and harnesses
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 764
- Thank you received: 227
11 Jan 2017 07:59 #176553
by zukebob
I started out with nothing & still have most of it left
Replied by zukebob on topic Re:Castor Adjustable Radius Arms
mlines wrote:
Completely agree. As these may have been made by the village smithy, I would have additional concerns as well. But I also agree on your other comment; interesting idea.
As the radius arms are subject to very large forces when in use I would be concerned about the strength
Completely agree. As these may have been made by the village smithy, I would have additional concerns as well. But I also agree on your other comment; interesting idea.
I started out with nothing & still have most of it left
Please Log in or Create an account to join the conversation.
Time to create page: 0.494 seconds
