A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
parts needed
- talby2491
- Topic Author
- New Member
-
Public
09 Aug 2016 15:33 #171172
by facade
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Replied by facade on topic parts needed
If you get the barrel out, you should be able to remove the broken off key, you need the barrel out to swap it anyway.
From memory, the barrel has to have the correct key in to come out though, depends how close the broken one is I suppose.
I've heard of people who have drilled a tiny drill into a broken key, and used a small screw to pull it out.
From memory, the barrel has to have the correct key in to come out though, depends how close the broken one is I suppose.
I've heard of people who have drilled a tiny drill into a broken key, and used a small screw to pull it out.
If it suddenly breaks, go back to the last thing that you did before it broke and start looking there
Please Log in or Create an account to join the conversation.
- jackonlyjack
-
- Offline
- Platinum Member
-
Registered
09 Aug 2016 16:14 #171174
by jackonlyjack
Replied by jackonlyjack on topic parts needed
i got one out years ago using a ty-rap
with good quality super glue
Jack
with good quality super glue
Jack
Please Log in or Create an account to join the conversation.
Time to create page: 3.645 seconds