A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Replacement inner sill panals
08 Jan 2015 21:11 #134595
by Rhinoman
Each? coincidentally my Jim just failed its MOT with rusty inner sills.
Some Suzukis and a bunch of motorcycles.
Replied by Rhinoman on topic Replacement inner sill panals
shoestring wrote: Hi thanks Rhinoman Suzuki price quoted £140 no thanks I've folded some 18 gauge tin to over plate the inner sill at a cost of £15 I'll post some photos after the weekend .
Each? coincidentally my Jim just failed its MOT with rusty inner sills.
Some Suzukis and a bunch of motorcycles.
Please Log in or Create an account to join the conversation.
- shoestring
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
11 Jan 2015 21:20 #134854
by shoestring
Replied by shoestring on topic Replacement inner sill panals
Yes I'm in the process now of welding both side rear wheel arch / boot floor and moving on to both side inner sils tomorrow using a mig welder . Oh yes I've turned the mig down to 70/80 amp and still the original Body tin is very thin (blowing holes etc) so you would have no chance with a stick/ arch welder I hope you get sorted ?. Mines getting a bit like the painting Forth Bridge never ending . Richie
Please Log in or Create an account to join the conversation.
- shoestring
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
11 Jan 2015 21:29 #134858
by shoestring
Replied by shoestring on topic Replacement inner sill panals
Called into my local motor factor and they called the main dealer and that's the price they gave per side .
Please Log in or Create an account to join the conversation.
11 Jan 2015 21:49 #134864
by Rhinoman
Some Suzukis and a bunch of motorcycles.
Replied by Rhinoman on topic Replacement inner sill panals
Yes, mine is being patched.
Some Suzukis and a bunch of motorcycles.
Please Log in or Create an account to join the conversation.
Time to create page: 2.122 seconds