A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the logo.
Fitting Xrox Bullbar into Jimny
- jamesgallier
- Topic Author
- New Member
-
Public
Less
More
- Thank you received: 0
03 Nov 2014 12:41 #128323
by jamesgallier
Fitting Xrox Bullbar into Jimny was created by jamesgallier
Hi there can anyone be kind enough in giving me a few pointers on how to fit an Xrox front bullbar into my jimny, as I just recently purchased the bar of someone online but came without instructions....
Do i need to bolt brakets into already existing chassis rails? Is it any drilling/welding/cutting required? much modifications needed?
Thanks
Do i need to bolt brakets into already existing chassis rails? Is it any drilling/welding/cutting required? much modifications needed?
Thanks
Please Log in or Create an account to join the conversation.
- Swifty
- New Member
-
Public
Less
More
- Thank you received: 0
03 Nov 2014 15:17 #128333
by Swifty
Replied by Swifty on topic Fitting Xrox Bullbar into Jimny
I've never seen anyone on this forum with one fitted, have you tried contacting the seller? I'd imagine there will be drilling required.
Please Log in or Create an account to join the conversation.
Less
More
- Posts: 3727
- Thank you received: 923
03 Nov 2014 15:55 #128339
by X8GGY
Replied by X8GGY on topic Fitting Xrox Bullbar into Jimny
A few of the Australian lads are running them... just need to wait for the time difference so they log on!

Please Log in or Create an account to join the conversation.
Less
More
- Posts: 3727
- Thank you received: 923
03 Nov 2014 15:59 #128340
by X8GGY
Replied by X8GGY on topic Fitting Xrox Bullbar into Jimny
Please Log in or Create an account to join the conversation.
Time to create page: 2.844 seconds