A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
What did the postman bring today
27 Jul 2021 19:30 #237051
by HUN
TrailMaster 2" lift kit
Full floating rear axle conversion, JB underbody guards & recovery points
ORE transfer box HD brackets
T-Max split charge system
X-Shock Dakar ceramic clutch kit & roof rack
Flo-Flex castor polybushes
Kumho KL71 tyres
AVM manual hubs
ORA radius arm guards
Push-fit breathers
Replied by HUN on topic What did the postman bring today
2 pairs of custom made rear half-shafts for full floating axle conversion.
TrailMaster 2" lift kit
Full floating rear axle conversion, JB underbody guards & recovery points
ORE transfer box HD brackets
T-Max split charge system
X-Shock Dakar ceramic clutch kit & roof rack
Flo-Flex castor polybushes
Kumho KL71 tyres
AVM manual hubs
ORA radius arm guards
Push-fit breathers
Please Log in or Create an account to join the conversation.
- Dirtbird
- New Member
-
Public
29 Jul 2021 16:28 #237125
by Riccy
I make the adapter plates that go with these particular axle shafts (see Brett aka Maverick for the shafts)...
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Replied by Riccy on topic What did the postman bring today
It adapts the rear axle to a 'floating' shaft and makes use of front bearing/hub assemblies to provide a much stronger and easier to replace rear wheel bearing. All 4 wheels now use the same bearing carrier and stub axle mounting arrangement, which is easy to swap and only a small spare part to carryWill you give us some pics of the build HUN what will floating axels do , not being smart just don't know.
I make the adapter plates that go with these particular axle shafts (see Brett aka Maverick for the shafts)...
J999 MNY, ULYSSES M18 VVT with ITB's Dyno tested at 130hp
Pickup/tipper, R7me gearbox & 6.4 Rocklobster, 31" Toyo MT, 2x ARB air locker 3.9 diffs in braced axles, 6" total lift, Floating rear conversion, Raptor painted, CB, Recaro's, Caged, etc, etc...
www.youtube.com/user/riclemus
Please Log in or Create an account to join the conversation.
29 Jul 2021 17:56 - 29 Jul 2021 17:57 #237132
by HUN
Here is some photo of my rear axle hub after the conversion has been done using parts from Riccy, Brett and Mr Suzuki.
Halfs-hafts only do torque transfer with this setup. Wheel bearing and ABS sensor have been relocated.
TrailMaster 2" lift kit
Full floating rear axle conversion, JB underbody guards & recovery points
ORE transfer box HD brackets
T-Max split charge system
X-Shock Dakar ceramic clutch kit & roof rack
Flo-Flex castor polybushes
Kumho KL71 tyres
AVM manual hubs
ORA radius arm guards
Push-fit breathers
Replied by HUN on topic What did the postman bring today
Will you give us some pics of the build HUN what will floating axels do , not being smart just don't know.
Here is some photo of my rear axle hub after the conversion has been done using parts from Riccy, Brett and Mr Suzuki.
Halfs-hafts only do torque transfer with this setup. Wheel bearing and ABS sensor have been relocated.
TrailMaster 2" lift kit
Full floating rear axle conversion, JB underbody guards & recovery points
ORE transfer box HD brackets
T-Max split charge system
X-Shock Dakar ceramic clutch kit & roof rack
Flo-Flex castor polybushes
Kumho KL71 tyres
AVM manual hubs
ORA radius arm guards
Push-fit breathers
Last edit: 29 Jul 2021 17:57 by HUN.
Please Log in or Create an account to join the conversation.
- Dirtbird
- New Member
-
Public
Time to create page: 0.238 seconds