A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the

logo.

front skid plate?

suzuki jimny fella
New Member
Public

08 Oct 2014 18:52 #126024 by suzuki jimny fella

Replied by suzuki jimny fella on topic front skid plate?

counter sink the bolts would be sweet

Please Log in or Create an account to join the conversation.

Spendersjim
New Member
Public

08 Oct 2014 19:53 #126030 by Spendersjim

Replied by Spendersjim on topic front skid plate?

Thanks, used 6mm ali plate and had the brackets made out of 3mm stainless.
Rivnuts used for the fixings.
Was considering countersinking the fixings but having had past experience of trying to get countersunk steel out of ali decided to go with the bolts for ease of removal at oil change time.

Please Log in or Create an account to join the conversation.

suzuki jimny fella
New Member
Public

09 Oct 2014 15:53 #126072 by suzuki jimny fella

Replied by suzuki jimny fella on topic front skid plate?

would snap them nuts or damage then playing in mud and stone lol

Please Log in or Create an account to join the conversation.

vladsogodel
New Member
Public

14 Oct 2014 07:57 #126481 by vladsogodel

Replied by vladsogodel on topic front skid plate?

Spendersjim wrote: Thanks, used 6mm ali plate and had the brackets made out of 3mm stainless.
Rivnuts used for the fixings.
Was considering countersinking the fixings but having had past experience of trying to get countersunk steel out of ali decided to go with the bolts for ease of removal at oil change time.

Good job.

I used 4mm stainles steel for the brakets and I also applied an aticorosion coating (electroplating) after welding and brushing the brakets.
I also dont think that countersinking the fixings is a good ideea, even my plate is designed to allow the oil change without removal. This holes are also good for watter and mud draining.

Please Log in or Create an account to join the conversation.

vladsogodel
New Member
Public

06 Dec 2014 20:57 #131714 by vladsogodel

Replied by vladsogodel on topic front skid plate?

discounts for Jimny front alu skidplates. Details on PM.

Please Log in or Create an account to join the conversation.

vladsogodel
New Member
Public

20 Mar 2015 13:44 #140994 by vladsogodel

Replied by vladsogodel on topic front skid plate?

Last 3 pcs. in UK.
75 £ /PCS

Please Log in or Create an account to join the conversation.

Time to create page: 0.466 seconds

front skid plate?

Events Menu