A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
logo.

not shaw of something ?

  • Jackdelves
  • Topic Author
  • New Member
  • New Member
    Public
More
01 Apr 2013 18:16 #67558 by Jackdelves
not shaw of something ? was created by Jackdelves
hi

as you may have read have just changed king pins ect.used the picture guide on this web site very handy.when i did the job i found i needed to remove a 3rd pipe assembly not shown on the guide.this sits just proud of a wot looks like a cogged wheel.this wheel as i call it gets in the way for access to the 4 bolts but i managed it ok.just wondered wot this assembly is for.



thanks .

Please Log in or Create an account to join the conversation.

  • vitara_mad
  • New Member
  • New Member
    Public
More
01 Apr 2013 18:17 #67559 by vitara_mad
Replied by vitara_mad on topic not shaw of something ?
does your jimny have abs ???

Please Log in or Create an account to join the conversation.

  • reaper
  • New Member
  • New Member
    Public
More
01 Apr 2013 18:18 #67560 by reaper
Replied by reaper on topic not shaw of something ?

vitara_mad wrote: does your jimny have abs ???

Nailed it :-)
Abs ring

Please Log in or Create an account to join the conversation.

  • Jackdelves
  • Topic Author
  • New Member
  • New Member
    Public
More
01 Apr 2013 18:23 #67562 by Jackdelves
Replied by Jackdelves on topic not shaw of something ?
yes it does

Please Log in or Create an account to join the conversation.

  • markyp2000
  • New Member
  • New Member
    Public
More
01 Apr 2013 18:25 - 01 Apr 2013 18:30 #67563 by markyp2000
Replied by markyp2000 on topic not shaw of something ?
4 bolts ? What 4 bolts are you on about
when i did mine i just removed the caliper steering joints hub pipes and ball dust seal and then the top and bottom king pin pins and took th hole lot off
Last edit: 01 Apr 2013 18:30 by markyp2000.

Please Log in or Create an account to join the conversation.

  • Jackdelves
  • Topic Author
  • New Member
  • New Member
    Public
More
01 Apr 2013 18:32 #67565 by Jackdelves
Replied by Jackdelves on topic not shaw of something ?
the 4 bolts holding the front assembly together just behind wot i think is the abs ring.

Please Log in or Create an account to join the conversation.

Time to create page: 0.148 seconds
Joomla template by a4joomla