A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
logo.
Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.
Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message
Suppliers or Members who have contributed to the forum can be identifed by the
cb radio
- DVs-Jimny
- New Member
-
Public
- VAXXi
- New Member
-
Public
- gus2000
- New Member
-
Public
28 Feb 2013 20:36 #64222
by gus2000
Hello VAXXi, Excellent your CB radio mounting.
I´m not cut any plastic. Install the support of the antenna in an existent hole and ground it with strap.
The diamond biband antenna operate correctly with low WSR
The 2 din metal cage is a standard equipment (factory) of jimny´s sold in Argentina
Cheerio
Gustavo
Replied by gus2000 on topic cb radio
VAXXi wrote:
gus2000 wrote: I´m ham radio and use VHF/UHF transceiver
Some ideas...........
Photos of the mounting in my jimny
Very nice idea with the roof rail - I'm using the same method (as seen here ) and it works a treat.
Two questions:
- Did you cut the plastic in the rail foot to make room for the grounding strap ? everything works ok after that ?
- The 2 DIN metal cage for mounting the CD player and transceiver ... is it an official Suzuki item or custom made/bought ?
Hello VAXXi, Excellent your CB radio mounting.
I´m not cut any plastic. Install the support of the antenna in an existent hole and ground it with strap.
The diamond biband antenna operate correctly with low WSR
The 2 din metal cage is a standard equipment (factory) of jimny´s sold in Argentina
Cheerio
Gustavo
Please Log in or Create an account to join the conversation.
- ZookFastback
- New Member
-
Public
24 Mar 2013 20:48 #66797
by ZookFastback
Replied by ZookFastback on topic cb radio
I use an old Uniden 12 and it has about 20-25 k range with a magnetic base and the 600mm aerial. When at work I only use the short 150mm aerial as it picks up too much chatter otherwise from all the other construction vehicles over the 28 kilometres of road building.
Please Log in or Create an account to join the conversation.
Time to create page: 0.854 seconds