BigJimny Store
A place for general chat about the Jimny. Please make sure you post in the correct section on the site, this way it keeps the site tidy AND ensures you get a more relevant answer.

Suppliers/Dealers or anyone selling with a commercial view in mind CANNOT post here unless responding to a specific request of a member in a "wanted" post.

Suppliers include people "breaking for spares" on a regular basis, when purchasing spares members should ask a supplier what they contribute to the running of the forum particularly if contacted by a Private Message

Suppliers or Members who have contributed to the forum can be identifed by the
[img
logo.

Bigjimny snorkel

  • Blissett
  • Topic Author
  • New Member
  • New Member
    Public
More
20 Feb 2013 18:29 #63378 by Blissett
Bigjimny snorkel was created by Blissett
Template shows 82mm hole. Hole saws sizes 76 or 86 mm. Should I use the 76 and file out or straight in with the 86..... My thinking is the 86 saves the filling and only 2 mm either side extra..

What size hale saws have you used????

Thanks

Mark

Please Log in or Create an account to join the conversation.

  • Sponnie
  • New Member
  • New Member
    Public
More
20 Feb 2013 19:22 #63395 by Sponnie
Replied by Sponnie on topic Bigjimny snorkel
I filed out, but if i was to do it again i'd go bigger. I don't remember what hole size I used, just make sure the snorkel outer will cover a 86mm hole.

I scratched mine to pieces when getting mine through a filed hole, the bodywork flexes when filing, its a nightmare!

Please Log in or Create an account to join the conversation.

  • barnes
  • New Member
  • New Member
    Public
More
20 Feb 2013 19:27 #63397 by barnes
Replied by barnes on topic Bigjimny snorkel
I had a 79mm saw i think it was and that was plenty big enough

Please Log in or Create an account to join the conversation.

  • vitara_mad
  • New Member
  • New Member
    Public
More
20 Feb 2013 19:27 #63398 by vitara_mad
Replied by vitara_mad on topic Bigjimny snorkel
or you could just get a 82mm hole saw :laugh:

Please Log in or Create an account to join the conversation.

  • Chriscov1988
  • New Member
  • New Member
    Public
More
20 Feb 2013 20:51 #63430 by Chriscov1988
Replied by Chriscov1988 on topic Bigjimny snorkel
It's 81mm and I bought the right size off eBay. All went perfectly well.

Please Log in or Create an account to join the conversation.

  • Skinhead
  • New Member
  • New Member
    Public
More
20 Feb 2013 21:11 #63439 by Skinhead
Replied by Skinhead on topic Bigjimny snorkel
I used a jig saw!

Please Log in or Create an account to join the conversation.

Time to create page: 0.315 seconds
Joomla template by a4joomla